Sanus Systems TV Mount VMPL2 User Guide

VMPL2  
(6901-100135 <01>)  
Thank you for choosing the Sanus Systems Vision Mount wall mount. The Sanus Systems  
VMPL2 wall mount is designed to support a monitor weighing up to 79 kg (175 lbs)  
to a vertical wall either flat or at a fixed 5 degree tilt. Hardware for multiple mounting  
configurations is included.  
WARNING  
This product contains small items that could be a choking hazard if swallowed.  
Keep these items away from young children!  
CAUTION  
This product is not designed for use in steel stud walls or old cinder block walls. The  
wall must be capable of supporting up to five times the weight of the monitor and  
mount combined. If you are uncertain about the nature of your wall or its ability  
to support the monitor, contact Sanus Systems Customer Service, or a qualified  
contractor.  
CAUTION  
Do not use this product for any purpose not explicitly specified by Sanus Systems.  
Improper installation or use may cause personal injury and/or property damage. If  
you do not understand these instructions, or if you have doubts about the safety of  
the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable  
for injury or damage caused by incorrect installation or use.  
Hardware and procedures for multiple mounting configurations are included.  
When you see this symbol, choose the correct configuration to suit your  
needs. Not all hardware included will be used.  
OPT  
Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA •  
 
1: Mount Monitor Brackets  
Television, Flat Back  
[05, 06,  
07, 08]  
[19, 20]  
[13, 14,  
15, 16]  
[03]  
Television, Curved Back or Obstruction  
[13, 14,  
15, 16]  
[19]  
[17, 18]  
[03]  
[09, 10,  
11, 12]  
[20, 21]  
6901-100135 <01>  
 
2: Mount the Wall Plate  
Wood Stud  
3/16 in.  
CAUTION  
Do not overtighten the Lag Bolts. Tighten Lag Bolts [21] only until the Lag Bolt  
Washer [22] is pulled firmly against the Wall Plate [01].  
12- 24”  
12- 24”  
64 mm (2-1/2 in.)  
4x  
[21]  
[01]  
[22]  
6901-100135 <01>  
 
Brick, Solid concrete and Concrete Block Mounting  
1/2 in.  
CAUTION  
To prevent property damage or personal injury, never drill into mortar between  
blocks and make sure Concrete Anchor [23] is seated flush with concrete surface.  
The drywall or other covering may not exceed 16 mm (5/8 in.) in thickness.  
[23]  
64 mm (2-1/2 in.)  
>
6
=
>
6”  
=
[22]  
[21]  
3: Choose Mounting Position  
5o  
OPT  
2x  
[25]  
[24]  
[04]  
6901-100135 <01>  
 
4: Hang TV Onto Wall Plate  
Insert Safety Bar  
OPT  
[02]  
CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein  
covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to  
change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV assumes no responsibility for accuracy,  
completeness or sufficiency of the information contained in this document.  
6901-100135 <01>  
 

PYLE Audio Stereo Amplifier PTVT790A User Guide
Q See Security Camera QH50DVR8C User Guide
Radica Games Handheld Game System I7008 User Guide
Reebok Fitness Treadmill RBTL13980 User Guide
Renesas Stereo Amplifier M65881AFP User Guide
Rolls DJ Equipment MX28 User Guide
Runco Projector PFP 11 User Guide
Samsung Microwave Oven CE2913 User Guide
Sanyo Digital Camera VPC AZ3 User Guide
Sears Dishwasher 6651359 User Guide